- Manuals
- Brands
- Central Pneumatic Manuals
- Nail Gun
- 97586
- Assembly and operating instructions manual
Floor nailer cleat & staple type contractor series
Hide thumbs Also See for 97586:
- Assembly and operating instructions manual (16 pages)
-
- Contents
- Table of Contents
- Troubleshooting
- Bookmarks
Advertisem*nt
Table of Contents
- 1 Product Specifications
- 2 Safety Warnings and Precautions
- 3 Operation
- 4 Clearing Jams
- 5 Inspection, Maintenance, and Cleaning
- 6 Troubleshooting
- 7 Please Read the Following Carefully
- 8 Parts List
- 9 Assembly Diagram
- 10 Limited 1 Year Warranty
- Download this manual
FLOOR NAILER
CLEAT & STAPLE TYPE
ASSEMBLY AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
2007 by Harbor Freight Tools
©
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Model 97586 / 95658
3491 Mission Oaks Blvd., Camarillo, CA 93011
. All rights reserved. No portion of this
®
.
®
Table ofContents
Advertisem*nt
Table of Contents
Related Manuals for Central Pneumatic 97586
-
Nail Gun Central Pneumatic 97586 Assembly And Operating Instructions Manual
Floor nailer cleat & staple type (16 pages)
-
Nail Gun Central Pneumatic 93909 Set Up And Operating Instructions Manual
Contractor series framing nailer (12 pages)
-
Nail Gun Central Pneumatic 97520 Assembly And Operating Instructions Manual
Air brad finish nailer 16 gauge - 2” contractor series (14 pages)
-
Nail Gun Central Pneumatic Contractor 98464 Set Up And Operating Instructions Manual
Contractor series three-piece air nailer kit (25 pages)
-
Nail Gun Central Pneumatic 97524 Assembly And Operating Instructions Manual
Central pneumatic air nailer/stapler 2-in-1 kit (12 pages)
-
Nail Gun Central Pneumatic Central Pneumatic Air Nailer/Stapler 2-in-1 Kit 97525 Assembly And Operating Instructions Manual
Air nailer/stapler 2-in-1 kit (12 pages)
-
Nail Gun Central Pneumatic 97525 Assembly And Operating Instructions Manual
Central pneumatic air nailer/stapler 2-in-1 kit (12 pages)
-
Nail Gun Central Pneumatic CENTRALPNEUMATIC 97526 Assembly And Operating Instructions Manual
Air pin nailer 23-gauge (11 pages)
-
Nail Gun Central Pneumatic 97526 Assembly And Operation Instructions Manual
Air pin nailer 23-gauge (11 pages)
-
Nail Gun Central Pneumatic Professional 97512 Assembly And Operating Instructions Manual
Professional concrete “t” nailer (3/4” to 2-1/2”) (13 pages)
-
Nail Gun Central Pneumatic 93760 Assembly And Operating Instructions Manual
Contractor series framing nailer 28 degree - full clip (15 pages)
-
Nail Gun Central Pneumatic 91053 Assembly And Operating Instructions Manual
Framing nailer 34 degree & 28 degree magazine angles contractor series (13 pages)
-
Nail Gun Central Pneumatic 92359 Assembly And Operating Instructions Manual
Coil roofing nailer 11 gauge contractor series (15 pages)
-
Nail Gun Central Pneumatic 92917 Assembly And Operating Instructions Manual
Coil roofing nailer 3/4” to 1-3/4” fastener length capacity (15 pages)
-
Nail Gun Central Pneumatic 92917 Set Up And Operating Instructions Manual
Coil roofing nailer 3/4” to 1-3/4” fastener length capacity (21 pages)
-
Nail Gun Central Pneumatic 93496 Assembly And Operating Instructions Manual
Air palm nailer (9 pages)
Summary of Contents for Central Pneumatic 97586
- Page 1 . All rights reserved. No portion of this © ® manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353.
-
Page 2: Product Specifications
It will do the job better and more safely at the rate for which it was intended. Do not modify this tool, and do not use this tool for a purpose for which it was not intended. SKU 97586 For technical questions, please call 1-800-444-3353 PAGE 2... - Page 3 Check for alignment and binding of moving parts,anybrokenpartsormountingfixtures,andanyotherconditionthatmay affect proper operation. Any part that is damaged should be properly repaired or replacedbyaqualifiedtechnician.DonotusethetooliftheHammerFace(10) does not operate properly. SKU 97586 For technical questions, please call 1-800-444-3353 PAGE 3 95658...
- Page 4 Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 17. Do not operate tool if under the influence of alcohol or drugs. Read warning labelsiftakingprescriptionmedicinetodetermineifyourjudgementorreflexes are impaired while taking drugs.
- Page 5 When unpacking, check to make sure that all accessories listed on page 12 are included, and the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
-
Page 6: Operation
OPERATION Forbestservice,youshouldincorporatearegulatorandanin-linefilterasshown inthediagrambelow.Hoses,couplers,regulators,andfiltersareallavailable from Harbor Freight Tools. REGULATOR COMPRESSOR FLOOR NAILER FILTER ASSEMBLY INSTRUCTIONS To Attach A Quick Coupler: This tool comes with a 1/4” Quick Connector attached to the Air Plug (55) prior to operation. You should also wrap the threaded portion of the Quick Connector with about3”ofpipethreadsealtape(notincluded).Then,firmlyre-attachtheQuick... - Page 7 (50) from the top. Up to 80 staples may be loaded in the Fixed Magazine. Push the Movable Magazine (35) forward and secure the Movable Magazine in place with the Lock (44). LOCK (44) MOVABLE MAGAZINE (35) FIXED MAGAZINE (50) SKU 97586 For technical questions, please call 1-800-444-3353 PAGE 7 95658...
- Page 8 9. Whenfinished,makesuretostoretheFloorNailerinaclean,dry,safelocation out of reach of children and other unauthorized people. HAMMER (57) (56) HAMMER FACE (10) SPACER (32) WORK SURFACE SKU 97586 For technical questions, please call 1-800-444-3353 PAGE 8 95658...
-
Page 9: Clearing Jams
Remove all cleat nails/staples from the Moveable Magazine (35). Then press the Lock (44) and slide the Moveable Magazine forward all the way, making sure it locks in place. SKU 97586 For technical questions, please call 1-800-444-3353 PAGE 9 95658... -
Page 10: Inspection, Maintenance, And Cleaning
Store the tool in a clean, dry, safe location out of reach of children. CAUTION: All maintenance, service, or repairs not listed in this manual are only to be attempted by a qualified service technician. SKU 97586 For technical questions, please call 1-800-444-3353 PAGE 10... -
Page 11: Troubleshooting
THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 97586 For technical questions, please call 1-800-444-3353 PAGE 11... -
Page 12: Parts List
Poppet Actuator Movable Magazine Air Plug O-Ring (54.2 x 3.5) Spring Washer (#6) Seal Screw (M6 x 35) Hammer Body Feeder Shoe Bumper Pusher Spring Hammer Nose BaffleLock 1/2 Spacer SKU 97586 For technical questions, please call 1-800-444-3353 PAGE 12 95658... -
Page 13: Assembly Diagram
Thiswarrantygivesyouspecificlegalrightsandyoumayalsohaveotherrightswhichvaryfrom state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 SKU 97586 For technical questions, please call 1-800-444-3353 PAGE 13 95658...
This manual is also suitable for:
95658
